Makerspace events


uCreate Makerspace, Room 1.11, George Square Library
Central Area

Induction 
Attend this induction at the uCreate makerspace in order to gain access to the space and equipment.
This induction covers health and safety, general information and basic equipment instructions.
This induction does not go into any specific detail on how to use any particular piece of studio equipment.

Optional Follow up training


uCreate Makerspace, Room 1.11, George Square Library
Central Area

This training provides you with the knowledge you need to safely operate the Soldering Iron in the uCreate makerspace during staffed hours.

The training covers operation of the soldering Iron,  a beginnners lesson on how to solder and health and safety.

Please note you cannot use the uCreate studio soldering iron without completing this training. Your name and University number will added to an allowed user list after completion.

Induction Follow-up:


uCreate Makerspace, Room 1.11, George Square Library
Central Area

Induction 
Attend this induction at the uCreate makerspace in order to gain access to the space and equipment.
This induction covers health and safety, general information and basic equipment instructions.
This induction does not go into any specific detail on how to use any particular piece of studio equipment.

Optional Follow up training


uCreate Makerspace, Room 1.11, George Square Library
Central Area

This training provides you with the knowledge you need to safely operate the CNC Mills in the uCreate Makerspace during staffed hours.

The training covers operation of the CNC Mills and relevant software.

Induction Follow-up:

If you have booked an induction of the day of this training, an optional space will be automatically reserved for you in this training - You do not need to also book this training.


uCreate Makerspace, Room 1.11, George Square Library
Central Area

Induction 
Attend this induction at the uCreate makerspace in order to gain access to the space and equipment.
This induction covers health and safety, general information and basic equipment instructions.
This induction does not go into any specific detail on how to use any particular piece of studio equipment.

Optional Follow up training


uCreate Makerspace, Room 1.11, George Square Library
Central Area

Induction 
Attend this induction at the uCreate makerspace in order to gain access to the space and equipment.
This induction covers health and safety, general information and basic equipment instructions.
This induction does not go into any specific detail on how to use any particular piece of studio equipment.

Optional Follow up training


uCreate Makerspace, Room 1.11, George Square Library
Central Area

Induction 
Attend this induction at the uCreate makerspace in order to gain access to the space and equipment.
This induction covers health and safety, general information and basic equipment instructions.
This induction does not go into any specific detail on how to use any particular piece of studio equipment.

Optional Follow up training


uCreate Makerspace, Room 1.11, George Square Library
Central Area

This training provides you with the knowledge you need to safely operate our 3D printers, for turning 3D models into physical objects.

The training covers operation of our 3D printing equipment and relevant software.

Induction Follow-up:

If you have booked an induction of the day of this training, an optional space will be automatically reserved for you in this training - You do not need to also book this training.


uCreate Makerspace, Room 1.11, George Square Library
Central Area

This training provides you with the knowledge you need to safely operate our 3D printers, for turning 3D models into physical objects.

The training covers operation of our 3D printing equipment and relevant software.

Induction Follow-up:

If you have booked an induction of the day of this training, an optional space will be automatically reserved for you in this training - You do not need to also book this training.


uCreate Makerspace, Room 1.11, George Square Library
Central Area

Induction 
Attend this induction at the uCreate makerspace in order to gain access to the space and equipment.
This induction covers health and safety, general information and basic equipment instructions.
This induction does not go into any specific detail on how to use any particular piece of studio equipment.

Optional Follow up training


uCreate Makerspace, Room 1.12 George Square Library
Central Area

This training provides you with the knowledge you need to safely operate Einscan scanners, for 3D scanning objects to create 3D models. This equipment can be loaned out of the studio.

The training covers operation of the Einscan equipment and relevant software.

Induction Follow-up:

If you have booked an induction of the day of this training, an optional space will be automatically reserved for you in this training - You do not need to also book this training.


uCreate Makerspace, Room 1.12 George Square Library
Central Area

This training provides you with the knowledge you need to safely operate Einscan scanners, for 3D scanning objects to create 3D models. This equipment can be loaned out of the studio.

The training covers operation of the Einscan equipment and relevant software.

Induction Follow-up:

If you have booked an induction of the day of this training, an optional space will be automatically reserved for you in this training - You do not need to also book this training.


uCreate Makerspace, Room 1.11, George Square Library
Central Area

Induction 
Attend this induction at the uCreate makerspace in order to gain access to the space and equipment.
This induction covers health and safety, general information and basic equipment instructions.
This induction does not go into any specific detail on how to use any particular piece of studio equipment.

Optional Follow up training


uCreate Makerspace, Room 1.11, George Square Library
Central Area

This training provides you with the knowledge you need to safely operate the Soldering Iron in the uCreate makerspace during staffed hours.

The training covers operation of the soldering Iron,  a beginnners lesson on how to solder and health and safety.

Please note you cannot use the uCreate studio soldering iron without completing this training. Your name and University number will added to an allowed user list after completion.

Induction Follow-up:


uCreate Makerspace, Room 1.11, George Square Library
Central Area

Induction 
Attend this induction at the uCreate makerspace in order to gain access to the space and equipment.
This induction covers health and safety, general information and basic equipment instructions.
This induction does not go into any specific detail on how to use any particular piece of studio equipment.

Optional Follow up training


uCreate Makerspace, Room 1.11, George Square Library
Central Area

This training provides you with the knowledge you need to safely operate the laser cutter in the uCreate makerspace during staffed hours.

The training covers operation of the laser cutter, the laser cutter software (retina engrave) and sending files from inkscape.
For learning about the operation of Inkscape to create desgins, please see our recorded workshop.


uCreate Makerspace, Room 1.11, George Square Library
Central Area

Induction 
Attend this induction at the uCreate makerspace in order to gain access to the space and equipment.
This induction covers health and safety, general information and basic equipment instructions.
This induction does not go into any specific detail on how to use any particular piece of studio equipment.

Optional Follow up training


uCreate Makerspace, Room 1.11, George Square Library
Central Area

Induction 
Attend this induction at the uCreate makerspace in order to gain access to the space and equipment.
This induction covers health and safety, general information and basic equipment instructions.
This induction does not go into any specific detail on how to use any particular piece of studio equipment.

Optional Follow up training


uCreate Makerspace, Room 1.11, George Square Library
Central Area

Induction 
Attend this induction at the uCreate makerspace in order to gain access to the space and equipment.
This induction covers health and safety, general information and basic equipment instructions.
This induction does not go into any specific detail on how to use any particular piece of studio equipment.

Optional Follow up training


uCreate Makerspace, Room 1.11, George Square Library
Central Area

This training provides you with the knowledge you need to safely operate our 3D printers, for turning 3D models into physical objects.

The training covers operation of our 3D printing equipment and relevant software.

Induction Follow-up:

If you have booked an induction of the day of this training, an optional space will be automatically reserved for you in this training - You do not need to also book this training.


uCreate Makerspace, Room 1.11, George Square Library
Central Area

This training provides you with the knowledge you need to safely operate our 3D printers, for turning 3D models into physical objects.

The training covers operation of our 3D printing equipment and relevant software.

Induction Follow-up:

If you have booked an induction of the day of this training, an optional space will be automatically reserved for you in this training - You do not need to also book this training.


uCreate Makerspace, Room 1.11, George Square Library
Central Area

Induction 
Attend this induction at the uCreate makerspace in order to gain access to the space and equipment.
This induction covers health and safety, general information and basic equipment instructions.
This induction does not go into any specific detail on how to use any particular piece of studio equipment.

Optional Follow up training


uCreate Makerspace, Room 1.11, George Square Library
Central Area

Induction 
Attend this induction at the uCreate makerspace in order to gain access to the space and equipment.
This induction covers health and safety, general information and basic equipment instructions.
This induction does not go into any specific detail on how to use any particular piece of studio equipment.

Optional Follow up training


uCreate Makerspace, Room 1.11, George Square Library
Central Area

This training provides you with the knowledge you need to safely operate the Soldering Iron in the uCreate makerspace during staffed hours.

The training covers operation of the soldering Iron,  a beginnners lesson on how to solder and health and safety.

Please note you cannot use the uCreate studio soldering iron without completing this training. Your name and University number will added to an allowed user list after completion.

Induction Follow-up:


uCreate Makerspace, Room 1.11, George Square Library
Central Area

Induction 
Attend this induction at the uCreate makerspace in order to gain access to the space and equipment.
This induction covers health and safety, general information and basic equipment instructions.
This induction does not go into any specific detail on how to use any particular piece of studio equipment.

Optional Follow up training


uCreate Makerspace, Room 1.11, George Square Library
Central Area

Induction 
Attend this induction at the uCreate makerspace in order to gain access to the space and equipment.
This induction covers health and safety, general information and basic equipment instructions.
This induction does not go into any specific detail on how to use any particular piece of studio equipment.

Optional Follow up training


uCreate Makerspace, Room 1.11, George Square Library
Central Area

Induction 
Attend this induction at the uCreate makerspace in order to gain access to the space and equipment.
This induction covers health and safety, general information and basic equipment instructions.
This induction does not go into any specific detail on how to use any particular piece of studio equipment.

Optional Follow up training


uCreate Makerspace, Room 1.11, George Square Library
Central Area

Induction 
Attend this induction at the uCreate makerspace in order to gain access to the space and equipment.
This induction covers health and safety, general information and basic equipment instructions.
This induction does not go into any specific detail on how to use any particular piece of studio equipment.

Optional Follow up training


uCreate Makerspace, Room 1.11, George Square Library
Central Area

This training provides you with the knowledge you need to safely operate our 3D printers, for turning 3D models into physical objects.

The training covers operation of our 3D printing equipment and relevant software.

Induction Follow-up:

If you have booked an induction of the day of this training, an optional space will be automatically reserved for you in this training - You do not need to also book this training.


uCreate Makerspace, Room 1.11, George Square Library
Central Area

This training provides you with the knowledge you need to safely operate our 3D printers, for turning 3D models into physical objects.

The training covers operation of our 3D printing equipment and relevant software.

Induction Follow-up:

If you have booked an induction of the day of this training, an optional space will be automatically reserved for you in this training - You do not need to also book this training.


uCreate Makerspace, Room 1.11, George Square Library
Central Area

Induction 
Attend this induction at the uCreate makerspace in order to gain access to the space and equipment.
This induction covers health and safety, general information and basic equipment instructions.
This induction does not go into any specific detail on how to use any particular piece of studio equipment.

Optional Follow up training